Requirements
The enviroment must be set up according to the guide
OpenCMT Castor Simulator: building the code
The source code for the Image Builder is stored in Baltig:
No Format |
---|
git clone https://baltig.infn.it/muontomography/castor-simulator.git cd castor-simulator |
These are the steps required for building the Image Builder and install it in the system:
No Format |
---|
cmake3 -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=RelWithDebInfo \ -DPACKAGE_INSTALL_LIB_DIR=/usr/lib64 \ -DPACKAGE_INSTALL_INC_DIR=/usr/include \ -DPACKAGE_INSTALL_DATA_DIR=/usr/share .. make sudo make install |
The libraries and header files are installed in the standard locations for the CentOS 7 system, so there's no need to for further configurations.
OpenCMT Castor Simulator: testing the application
The simulator requires two different configuration files: g4config.in and muCastor.ini. The templates for those files with basic definitions are located in the setup directory of the castor-simulator project.
The configuration files must be located in the working directory. The application stores all the files in the directory output created in the working directory.
A simple test is:
No Format |
---|
simulate_muCastor -run 1 -events 100000 |