...
WARNING: set slew rate to 50% of MAX Parlarne con Iungo
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
RESE send reset
WARNING: set slew rate to 50% of MAX Parlarne con Iungo
POWR send global_off
OFF
MODE send standby/operational aggiustare tempo di commutazione
MODE <elementName> STBY|OPER
POLA unipolarWithRemoteCtl set polarity
bipolar error: notExecutableCmd
SSLP set slew rate
NOTE: the power supply must stay in STANDBY state to accept the SSLP command.
Specifications for quadrupoles ask for a setting range from 1 to 10 [A/s]
Tested on quadrupoles: the raw setting range is (10,290); lower and higher values are forced to 10 and 290.
The raw setting range for quadrupoles seems wrong: it should be (10,100). It is not clear what happens for settings between 100 and 290.
PSET load current set register
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
POWR send global_off
OFF
Jira server INFN Ticketing System columns key,summary,type,created,updated,due,assignee,reporter,priority,status,resolution maximumIssues 20 jqlQuery summary ~ "POWR" OR description ~ "POWR" serverId 8087fedc-8816-3706-9e66-78f987f39e0c
MODE send standby/operational aggiustare tempo di commutazione
MODE <elementName> STBY|OPER
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
POLA unipolarWithRemoteCtl set polarity
bipolar error: notExecutableCmd
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
SSLP set slew rate
NOTE: the power supply must stay in STANDBY state to accept the SSLP command.
Specifications for quadrupoles ask for a setting range from 1 to 10 [A/s]
Tested on quadrupoles: the raw setting range is (10,290); lower and higher values are forced to 10 and 290.
The raw setting range for quadrupoles seems wrong: it should be (10,100). It is not clear what happens for settings between 100 and 290.
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
PSET load current set register
MG1Dyn.currentPreSetting <- TRUE
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
SETT set current and start ramp
...
WARNING: fakeName is mandatory and must be a 8 characters string. As an example, it could be a repetition of <elementName> or any 8 characters dummy string (e.g. "FAKENAME").g. "FAKENAME")
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
STRG send start ramp
MG1Dyn.currentSetting <- MG1Dyn.currentPreSetting
MG1Dyn.currentPreSetting <- 0
STRG <elementName> 0|1
<- MG1Dyn.currentPreSetting
MG1Dyn.currentPreSetting <- 0
STRG <elementName> 0|1
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
NOTA: si potrebbe discriminare il paramentro e fargli fare:
...
WAVE <elementName> DC|PULSED
| Jira | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
01-02-2019 (for CAENels Easy Driver)
...